GSH-S 10-12.5m

Novedad

Wire position transducer (Hall effect) with electrical stroke up to 12500mm

GSH-S 10-12.5m

Novedad

Wire position transducer (Hall effect) with electrical stroke up to 12500mm

Características principales

Stroke from 10000 to 12500mm
Supply voltage +10..36 Vdc
Linearity < + - 1% FS

Encuentra un distribuidor cerca de ti

Datos técnicos

Panorámica

Linear transducer with contactless Hall effect measurement technology.

Excellent repeatability, high IP rating, resistance to shock and vibrations, and high electromagnetic compatibility make this transducer suitable for mobile hydraulic applications.

Developed to guarantee a robust, high-performance solution for applications such as agricultural vehicles, earth-moving machines, and hoisting equipment.

Its compact dimensions (only 91,8mm height) make it the ideal product to be incorporated into the crossbars of the stabilization legs of vehicles.

Measurement Range: Stroke 10.000mm – 12.500mm (for lower or middle strokes please refer to the dedicated ZERO/SPAN manual)
Supply voltage: +10..36 Vdc (other output – see output signal for right supply voltage)
Electrical connections: M12 connector output
Resolution: Virtually infinite for potentiometric – voltage divider- output; analog output 0.5…4.5V, 0…10V, 4…20mA 12 bit; CANopen output 14 bit
Linearity: ± 0.5% FS.
Repeatability: < ±2% FS
Working temperature: -40°C…+85°C
Vibrations: 20g between 10 Hz … 2000 Hz according to IEC 60068-2-6
Shock: Pulse on 3 axes; 50g 11 ms according to IEC 60068-2-27
Electromagnetic compatibility: 2014/30/EU Electromagnetic Compatibility (EMC)
Life: 500.000 max speed 1m/s acc. max 0.5g; 250.000 max speed 2 m/s acc. max 1g; typical speed 1m/s, typical acceleration 1g
IP Protection Level: IP67 with female mating connector (see accessories)
Constructive material of transducer body and wire
Transducer: PBT
Wire: AISI316 stainless steel, Ø0.85mm nylon coating